Rather have a pro do it for you?
| Tools and Supplies to Adjust the Flow on an Inground Pool Sand Filter | ||||
|---|---|---|---|---|
| 1 | Phillips screwdriver | |||
| 2 | Flathead screwdriver | |||
| 3 | Adjustable wrench | |||
| 4 | Filter gauge | |||
| 5 | Teflon tape | |||
| 6 | Lubricant | |||
| 7 | Pool filter sand | |||
| 8 | Pool filter cleaner | |||
| 9 | Hose | |||
| 10 | Backwash hose attachment | |||
How to Adjust the Flow on an Inground Pool Sand Filter
Learn How to Easily Adjust the Flow on Your Inground Pool Sand Filter
Adjusting the flow on an inground pool sand filter is an important part of maintaining your pool's cleanliness and clarity. By following these simple steps, you can ensure that your pool stays in top condition all season long.
Step 1: Turn off the pool pump
Before adjusting the flow on your inground pool sand filter, you need to turn off the pool pump. This will prevent any water from flowing through the filter while you make adjustments.
Step 2: Locate the multiport valve
The multiport valve is the control center for your inground pool sand filter. It is usually located on the top of the filter tank and has several different settings, including "filter," "backwash," "rinse," and "waste."
Step 3: Adjust the valve to the desired setting
To adjust the flow on your inground pool sand filter, you need to adjust the multiport valve to the desired setting. If you want to increase the flow, you can switch the valve to the "filter" setting. If you want to decrease the flow, you can switch the valve to the "backwash" or "rinse" setting.
Step 4: Turn on the pool pump
Once you have adjusted the multiport valve to the desired setting, you can turn on the pool pump. This will allow water to flow through the filter and adjust the flow according to your settings.
Step 5: Monitor the pressure gauge
As the water flows through the filter, you should monitor the pressure gauge on the filter tank. If the pressure is too high, you may need to backwash the filter to remove any debris and reduce the pressure.
Step 6: Adjust the flow as needed
If you find that the flow is still too high or too low, you can adjust the multiport valve accordingly. You may need to experiment with different settings to find the perfect flow for your pool.
By following these simple steps, you can adjust the flow on your inground pool sand filter and keep your pool clean and clear all season long. Remember to always turn off the pool pump before making any adjustments and to monitor the pressure gauge to ensure that your filter is working properly.
