How to Prime an Above Ground Pool Sand Filter

Priming an above ground pool sand filter is a crucial step to ensure that your pool is clean and safe for swimming. Priming the filter involves removing any air pockets that may have formed in the filter, allowing water to flow freely through the system. Here is a step-by-step guide on how to prime an above ground pool sand filter:

Step 1: Turn off the pool pump
Before you begin priming your above ground pool sand filter, make sure that the pool pump is turned off. This will prevent any damage to the system and keep you safe while working on it.

Step 2: Open the filter tank lid
Locate the filter tank lid on your above ground pool sand filter and remove it by turning it counterclockwise. Set the lid aside in a safe location.

Step 3: Fill the filter tank with water
Using a garden hose or a bucket, fill the filter tank with water until it is about three-quarters full. This will help to remove any air pockets that may have formed in the filter.

Step 4: Replace the filter tank lid
Once the filter tank is filled with water, replace the filter tank lid by turning it clockwise until it is securely in place.

Step 5: Turn on the pool pump
With the filter tank lid securely in place, turn on the pool pump. This will allow the water to flow through the system and remove any remaining air pockets.

Step 6: Monitor the filter pressure
Monitor the filter pressure gauge on your above ground pool sand filter. As the water flows through the system, the pressure will increase. Once the pressure has stabilized, you can begin using your pool as usual.

In conclusion, priming an above ground pool sand filter is a simple process that can be done in just a few easy steps. By following these steps, you can ensure that your pool is clean and safe for swimming all season long.