Rather have a pro do it for you?
| Tools and Supplies to Maintain an Above Ground Pool Sand Filter | ||||
|---|---|---|---|---|
| 1 | Screwdriver set | |||
| 2 | Socket wrench set | |||
| 3 | Pool filter cleaner | |||
| 4 | Pool filter sand | |||
| 5 | Rubber mallet | |||
| 6 | Pool filter gauge | |||
| 7 | Teflon tape | |||
| 8 | Pipe wrench | |||
| 9 | Pool filter sand scoop | |||
| 10 | Pool filter sand screen | |||
| 11 | Garden hose | |||
| 12 | Pool filter O-ring lubricant | |||
| 13 | Pool filter pressure gauge | |||
| 14 | Pool filter valve handle | |||
| 15 | Pool filter tank wrench. | |||
How to Maintain an Above Ground Pool Sand Filter
Easy Steps to Keep Your Above Ground Pool Sand Filter in Top Condition
Maintaining an above ground pool sand filter is essential to keep your pool water clean and clear. Here are the steps to follow to maintain your above ground pool sand filter:
1. Backwash the filter: Backwashing the filter is the first step in maintaining your above ground pool sand filter. Turn off the pump and set the multiport valve to the backwash position. Turn the pump back on and let it run for about 2-3 minutes or until the water in the sight glass is clear.
2. Rinse the filter: After backwashing, set the multiport valve to the rinse position and turn on the pump for about 30 seconds. This will help to remove any remaining debris from the filter and prevent it from returning to the pool.
3. Check the pressure gauge: The pressure gauge on the filter should be checked regularly. If the pressure reading is 8-10 psi higher than the normal operating pressure, it's time to backwash the filter.
4. Inspect the sand: The sand in the filter should be inspected at least once a year. To do this, turn off the pump and remove the filter cap. Use a flashlight to inspect the sand for any signs of clumping or discoloration. If the sand appears dirty or clumped together, it may be time to replace it.
5. Clean the skimmer basket: The skimmer basket should be cleaned regularly to prevent debris from clogging the filter. Remove the basket and empty any debris into a trash can. Rinse the basket with a hose and replace it in the skimmer.
6. Check the pump basket: The pump basket should also be checked regularly for debris. Turn off the pump and remove the pump basket. Empty any debris into a trash can and rinse the basket with a hose before replacing it.
7. Add pool filter cleaner: Adding a pool filter cleaner to the filter can help to remove any built-up debris and oils. Follow the instructions on the cleaner for the recommended amount to add to your filter.
By following these steps, you can maintain your above ground pool sand filter and keep your pool water clean and clear.
