Rather have a pro do it for you?
| Tools and Supplies to Winterize an Above Ground Pool Sand Filter | ||||
|---|---|---|---|---|
| 1 | Screwdriver set | |||
| 2 | Pliers | |||
| 3 | Pipe cutter | |||
| 4 | Teflon tape | |||
| 5 | Pool filter cleaner solution | |||
| 6 | Pool filter sand | |||
| 7 | Pool filter sand replacement kit | |||
| 8 | Pool filter pressure gauge | |||
| 9 | Pool filter pump wrench | |||
| 10 | Pool filter backwash hose. | |||
How to Winterize an Above Ground Pool Sand Filter
Winterizing Your Above Ground Pool Sand Filter: A Simple Guide
Winterizing an above ground pool sand filter is a crucial task that every pool owner should do before the cold winter months arrive. Proper winterization helps to protect your pool equipment from damage caused by freezing temperatures and prolongs the life of your pool filter. Here is a step-by-step guide on how to winterize an above ground pool sand filter:
Step 1: Turn off the pool pump and filter
The first step in winterizing your pool sand filter is to turn off the pool pump and filter. This will prevent any water from flowing through the system during the winter months.
Step 2: Drain the filter tank
Next, you will need to drain the filter tank. To do this, remove the drain plug located at the bottom of the tank. Allow the water to drain completely from the filter tank.
Step 3: Remove the pressure gauge and drain the valve
After draining the filter tank, remove the pressure gauge and drain the valve. This will ensure that any remaining water is removed from the filter system.
Step 4: Remove the sand from the filter
Once the filter tank is drained, you will need to remove the sand from the filter. To do this, remove the filter head and carefully scoop out the sand using a plastic scoop or your hands. Place the sand in a large plastic bag or container and store it in a dry place for the winter.
Step 5: Clean the filter tank
After removing the sand, clean the filter tank thoroughly using a hose and a soft-bristled brush. This will remove any dirt or debris that may have accumulated in the tank.
Step 6: Reassemble the filter
Once the filter tank is clean, you can reassemble the filter. Replace the drain plug, pressure gauge, and valve drain plug. Then, add the required amount of winterizing chemicals to the pool water, as recommended by the manufacturer.
Step 7: Cover the filter
Finally, cover the filter with a winter pool cover to protect it from the elements. This will also prevent any debris from entering the filter system during the winter months.
In conclusion, winterizing an above ground pool sand filter is an essential task that should not be overlooked. By following these simple steps, you can ensure that your pool filter is protected from damage caused by freezing temperatures and ready to use when the warmer weather returns.
